Top Talent Automotive Fixture and Jigs Co.,LTD
Top Talent Automotive Fixture and Jigs Co.,LTD
Add to Cart
VW 216 Project Customized Automotive Stamping Checking Fixtures / Main Material for AL
Product Description
All fixture design have consideration to:
- Operator safety
- Low maintenance
- Operating simplicity and inspection ease
- Cost
PRODUCTION TOLERANCES FOR C/F
RPS:+/- 0,02 mm after 24 hour tempering during temperature 20±1°C
In general: +/- 0,05 mm
CAD-data format of C/F project
- IGS.VDA.MODEL
- CATIA 4.x
- CATIA 5.x
- STEP, STP
Our production detail
| Items | ||
| 1 | Base Material | Al |
| 2 | Application | Stamping parts |
| 3 | Surface treatment | Oxidation |
| 4 | Processing Precision | 0.15 |
| 5 | Accuracy for Other Profiles | 0.1 |
| 6 | Accuracy for Datum Hole | ±0.05 |
| 7 | Certificate | ISO 9001:2008 |
| 8 | CMM certification | Yes |
| 9 | Software | Catia, UG, CAD, STP |
| 10 | Specification | 300*200*180mm |
| 11 | Packing | Wooden Box |
Other format is necessary to consult with customer.
This regulation describes the requirements for checking fixture ordered by the Magna Cartech (MCT) from external suppliers.
All is described in detail in other chapters of this document.If any of the requirements for a specific checking fixture is inapplicable or unclear, the supplier is obliged to inform the person responsible for the C/F in MCT and in cooperation with him to take appropriate actions.If a specific requirements are given by the customer, must be by producer accepted.
For tolerances less than 0,5 mm, deviation of measuring device must not exceed tolerance field more then 10%
Tolerances for GO-NOGO caliber, locating pin, gap gauge and trim gauge are described in chapter 8